Smart Utilities
IoT-Enabled Grid Monitoring: Reducing Outages in Everett's Utility Network
Published by IOT Washington Research & Editorial Team

- Why a Modern Distribution Grid Needs More Than Wires and Poles
- The Core Technology: Intelligent Reclosers and Real-Time Control
- What the Numbers Suggest About Potential Impact
- A Second Benefit: Wildfire Risk Mitigation
- How This Fits Into Snohomish PUD's Broader Infrastructure Plans
- What This Means for Everett-Area Customers
- Challenges in Deploying Grid Intelligence at This Scale
- Where This Is Headed
Snohomish County PUD, headquartered in Everett and serving roughly 370,000 electric customers across the county, is in the middle of a four-year grid modernization effort with a specific, publicly stated target: cut outage duration by 25 percent across its 6,000-mile distribution network. The initiative, called SnoSMART, represents a $60 million infrastructure investment partially funded by the U.S. Department of Energy, and the technology at its center is deceptively simple in concept even though the engineering behind it is not: give the grid the ability to sense and respond to problems automatically, rather than waiting for a human crew to find and fix them manually.
This article looks at how that IoT-enabled grid monitoring actually works, what results similar technology has produced elsewhere, and what it means for the reliability of power across Everett and the broader Snohomish County service area.
Why a Modern Distribution Grid Needs More Than Wires and Poles
A traditional electric distribution system is largely reactive. When a tree branch falls on a line or a piece of equipment fails, power goes out, and the utility typically learns about it from customer calls rather than the grid itself, then dispatches a crew to physically locate and repair the fault before service can be restored. For a utility managing 6,000 miles of distribution lines across a service territory that spans dense urban Everett neighborhoods and more sparsely populated rural areas, that reactive model means outage duration is largely determined by how quickly a crew can physically find and reach the problem, a process that can stretch for hours depending on the fault's location and severity.
SnoSMART is built around changing that fundamental dynamic, giving the grid itself the ability to detect and respond to faults automatically, in some cases before an outage even reaches most customers downstream of the problem.
The Core Technology: Intelligent Reclosers and Real-Time Control
At the heart of the SnoSMART deployment is a combination of intelligent control systems and automatic circuit recloser technology, provided through a multi-year partnership with Eaton, a global intelligent power management company. Automatic circuit reclosers function as a kind of smart circuit breaker for the distribution grid, automatically interrupting a fault when it occurs and then attempting to restore power shortly afterward, since a significant share of faults on overhead lines are momentary, caused by something like a tree branch briefly contacting a line rather than permanent equipment failure or damage.
The wireless communication capability built into this equipment is what elevates it from simple automated hardware into genuine IoT-enabled grid infrastructure. By integrating wireless connectivity, PUD engineers can remotely monitor and control this equipment in real time from a central operations center, rather than requiring a technician to physically visit each device to check its status or make an adjustment, enabling faster outage response across the entire 6,000-mile network simultaneously rather than one device at a time.
What the Numbers Suggest About Potential Impact
| Metric | Detail |
|---|---|
| Target outage duration reduction | 25 percent across the PUD's full distribution network |
| Recloser technology impact (industry research) | 50 to 90 percent improvement in outage rates where deployed, according to Eaton research |
| Network scope | 6,000 miles of distribution lines across Snohomish County |
| Project investment and timeline | $60 million over four years, partially funded by the U.S. Department of Energy |
These figures matter in combination, not isolation. A 25 percent reduction in outage duration across a network the size of Snohomish County PUD's service territory represents a meaningful, measurable improvement in reliability for hundreds of thousands of customers, and the underlying recloser technology's documented ability to improve outage rates by as much as 50 to 90 percent where deployed suggests the PUD's own 25 percent target may reflect a conservative, network-wide average rather than the technology's full potential at any single well-suited location.
A Second Benefit: Wildfire Risk Mitigation
SnoSMART's technology serves a dual purpose that extends beyond simple reliability improvement. The same automatic circuit reclosers that restore power quickly after a momentary fault also reduce the duration of fault energy on overhead lines, directly lowering wildfire ignition risk, since a fault that persists longer on an energized line increases the chance of sparking a fire under dry or windy conditions. As Washington and the broader Pacific Northwest have faced increasingly severe wildfire seasons, this combination of reliability and wildfire safety benefit from a single technology investment reflects a broader trend across Western utilities, where grid modernization projects increasingly serve both goals simultaneously rather than treating them as separate initiatives.
How This Fits Into Snohomish PUD's Broader Infrastructure Plans
SnoSMART is not happening in isolation. Snohomish County PUD has a substantial pipeline of parallel infrastructure projects that will interact with and reinforce the grid modernization effort, including a rebuild of the 115-kilovolt transmission line connecting its Perrinville and Maplewood substations, targeted for 2026 completion, and planning for a new 115-kilovolt line to a new Getchell substation to support load growth specifically in Everett, Marysville, and north Snohomish County, targeted for 2027. A new Crosswind Substation constructed to support a future battery energy storage system and increase reliability in Smokey Point is also targeted for 2026 completion.
This layered approach, upgrading transmission capacity, adding substations to support growing demand, and deploying intelligent monitoring and control at the distribution level simultaneously, reflects the reality that no single technology investment solves grid reliability on its own. IoT-enabled recloser technology helps the existing network respond faster to faults, while the parallel transmission and substation projects address the underlying capacity constraints that a growing Everett-area population and economy are placing on the system.
What This Means for Everett-Area Customers
- Expect gradual, network-wide reliability improvement over the SnoSMART project's four-year timeline rather than an immediate, dramatic change, since the technology deploys progressively across the full 6,000-mile distribution system.
- Understand that momentary outages, brief interruptions the reclosers are specifically designed to resolve automatically, may become less noticeable or disruptive even before longer, sustained outages see their full targeted improvement.
- Watch for continued substation and transmission line projects through 2027 and 2028 in the Everett, Marysville, and north county areas, which work alongside SnoSMART to address both grid intelligence and underlying capacity.
- Report outages through the PUD's established channels as usual during the rollout period, since full network coverage takes time and not every location will see the technology's benefits simultaneously.
- Recognize the wildfire mitigation benefit as a genuine secondary goal of this investment, not just a reliability upgrade, particularly relevant for customers in the more rural, vegetation-dense portions of the PUD's service territory.
Challenges in Deploying Grid Intelligence at This Scale
Retrofitting intelligent, wirelessly connected equipment across 6,000 miles of existing distribution infrastructure, much of it built and maintained over decades under a purely mechanical, non-networked design assumption, represents a genuinely large engineering undertaking, not a simple hardware swap. Coordinating this rollout across such a large geographic area, while maintaining normal grid operations and customer service throughout the transition, requires careful sequencing, exactly the kind of phased, multi-year approach SnoSMART's four-year timeline reflects.
Cybersecurity is a related and increasingly important consideration for any utility adding wireless connectivity and remote control capability to critical infrastructure. Grid equipment that can be monitored and controlled remotely also represents a new category of asset that needs to be secured against unauthorized access, a responsibility that grows directly alongside the operational benefits the same connectivity provides.
Where This Is Headed
As SnoSMART continues its four-year rollout, expect Snohomish County PUD to expand real-time monitoring and automated fault response capability progressively across its full service territory, with the parallel transmission and substation investments already underway through 2027 and 2028 compounding the reliability benefit further. For a utility managing both a growing customer base and the increasing wildfire risk facing much of the Pacific Northwest, IoT-enabled grid infrastructure like SnoSMART's intelligent reclosers represents the kind of dual-purpose investment likely to become standard practice across Washington's electric utilities, delivering measurable reliability improvement while simultaneously addressing a genuine and growing public safety concern.
