Loading...

Smart Water Meters: How Vancouver, WA Is Tackling Water Loss with IoT

Smart Utilities

Published by IOT Washington Research & Editorial Team

Smart Water Meters: How Vancouver, WA Is Tackling Water Loss with IoT

Clark Public Utilities, the electric and water utility serving Vancouver, WA and the surrounding county, is in the middle of one of the more significant infrastructure transitions in the utility's history. Under a program called My Meter Exchange, the utility is deploying a Sensus FlexNet Advanced Metering Infrastructure system across both its electric and water customer base, targeting full system-wide deployment by the first quarter of 2029. Preliminary infrastructure work, replacing utility poles and installing communications equipment at substations and rights-of-way, began in the second half of 2026. This article looks at what that transition actually involves, why it matters specifically for water loss, and what customers should expect as it rolls out.

Why Water Loss Is a Genuinely Expensive Problem

Water utilities lose a meaningful share of the water they treat and pump before it ever reaches a customer's tap, through aging pipe leaks, meter inaccuracy, and unauthorized use that goes undetected under older metering technology. Under a legacy drive-by or manual reading system, a utility typically only discovers a significant leak when a customer notices an unusually high bill weeks or months after the leak started, or when a visible break surfaces on a street. That delay is not just an inconvenience. Every gallon lost between treatment and consumption represents real, sunk cost in energy, chemicals, and infrastructure capacity that a utility spent to produce water nobody actually used.

Clark Public Utilities' prior system relied on Automated Meter Reading, which required technicians to drive within a few miles of customers to collect readings, a meaningful improvement over fully manual reading but still fundamentally a periodic snapshot rather than continuous monitoring. That gap between snapshots is exactly where undetected leaks and water loss accumulate unnoticed.

How Advanced Metering Infrastructure Actually Changes This

The core difference between the utility's legacy system and the new AMI deployment is continuous, two-way communication. As Clark Public Utilities technical innovations project manager Julie Landry has explained, the new meters can be asked for a reading at any point, and they also send regular information back to the utility automatically, a fundamental shift from periodic drive-by collection to near real-time visibility into consumption and system conditions across the entire service territory.

For water specifically, this continuous data stream means a sudden, unexplained increase in flow at a specific meter, the signature of a leak, either on the utility side of the connection or within a customer's own plumbing, can be flagged automatically rather than waiting for a customer to notice a spike on their next bimonthly statement. The same wireless network built for electric meters extends this capability to water customers as part of the unified My Meter Exchange program, rather than requiring a completely separate parallel infrastructure investment for each utility type.

What the Rollout Actually Looks Like

Phase Timeline What Happens
Preliminary infrastructure upgrades Second half of 2026 Utility pole replacements and communications equipment installation at substations and rights-of-way
Endpoint installation Ongoing through full deployment Electric meters and water pit-set endpoints installed at individual customer locations
Full system-wide deployment Targeted by Q1 2029 Complete transition to the Sensus FlexNet AMI system for all electric and water customers
Customer portal access Expands as deployment completes Near real-time usage data accessible through the utility's metering portal

Customers should expect some direct, if minor, disruption during the transition. Clark Public Utilities has been explicit that meter replacement causes a momentary outage, and the utility has emphasized proactive communication, including advance postcards for customers near planned infrastructure work, precisely because clear notice reduces the confusion and complaint volume that tends to accompany any large-scale utility infrastructure project touching individual homes and businesses directly.

Why This Timeline Reflects a Deliberate, Not a Delayed, Approach

Clark Public Utilities is not rushing this transition, and that pace is worth understanding in context rather than treating as sluggishness. As of 2022, roughly 72 percent of all electric meters nationally already used advanced metering infrastructure, meaning Clark Public Utilities is joining a well-established technology category rather than pioneering an unproven system, a distinction that matters because it means the utility can draw on a decade of deployment lessons from other utilities, including many across Washington State, rather than working through problems for the first time.

Washington utilities including Benton PUD, Cowlitz PUD, Clallam PUD, Grant PUD, Tacoma Power, Chelan PUD, Seattle City Light, and Puget Sound Energy have all deployed or are deploying comparable AMI systems, giving Clark Public Utilities a substantial body of regional experience to draw on for vendor selection, customer communication, and technical implementation as its own project moves through full deployment.

That regional precedent also shapes how Clark Public Utilities is sequencing its own rollout. Rather than attempting a single simultaneous cutover across its entire service territory, the utility is following the same phased, infrastructure-first approach other Washington districts have used successfully, upgrading the underlying communications backbone at substations and along rights-of-way before endpoint installation begins at individual homes and businesses. That sequencing reduces the risk of a rushed deployment producing the kind of billing errors or connectivity gaps that have occasionally surfaced in utilities that moved to full AMI conversion on a more compressed timeline.

What This Means for Vancouver-Area Water Customers

  1. Expect faster leak notification once AMI deployment reaches your service address, since continuous meter data replaces the periodic snapshot that previously delayed leak discovery by weeks or months.
  2. Watch for advance notice from the utility before infrastructure work occurs near your property, since Clark Public Utilities has committed to proactive communication ahead of pole replacements and meter installation.
  3. Anticipate access to near real-time usage data through the utility's metering portal as deployment progresses, supporting more informed conservation decisions than a bimonthly bill alone can provide.
  4. Understand that the transition unfolds over several years rather than all at once, with full system-wide completion targeted for the first quarter of 2029, so different neighborhoods and service areas will see the upgrade at different times.
  5. Report a suspected leak through existing utility channels in the meantime, since AMI benefits only apply once a specific meter has been upgraded, and legacy detection methods remain the primary tool until that transition reaches a given address.

The Regulatory and Safety Context Behind the Technology

Advanced metering infrastructure in Washington operates under real regulatory oversight, not as an unregulated technology rollout. Meters must meet safety requirements defined in the National Electric Safety Code, and public service commissions require independent certification confirming resistance to heat, fire, voltage surges, and self-heating before deployment. The Washington Utilities and Transportation Commission has published consumer-facing guidance on smart meter basics specifically to help customers understand the technology as it becomes more widespread across the state's utility providers.

Some Washington utilities, including Jefferson County PUD, have also implemented formal opt-out programs offering alternative, non-wireless metering technology for customers with specific concerns about radio-frequency emitting devices, reflecting an industry-wide recognition that customer comfort and choice matter alongside the operational benefits AMI delivers.

Where This Is Headed

As Clark Public Utilities' My Meter Exchange program moves through full deployment over the next several years, expect the water loss reduction benefits to compound as more of the service territory comes online with continuous monitoring, since a partially deployed AMI system can only flag leaks and anomalies at the specific addresses already upgraded. For a growing service area managing both aging infrastructure and increasing demand, the shift from periodic drive-by readings to continuous, two-way meter communication represents a foundational upgrade that extends well beyond water loss reduction alone, supporting faster outage response, more accurate billing, and better long-term capital planning as the utility works toward its 2029 completion target.

Frequently asked questions

It is a multi-year infrastructure project deploying Sensus FlexNet Advanced Metering Infrastructure for both electric and water customers across Clark Public Utilities' service area, targeting full system-wide deployment by the first quarter of 2029.

Continuous, two-way meter communication allows the utility to detect unusual flow patterns, the signature of a leak, in near real-time rather than waiting for a customer to notice a high bill weeks or months after a leak began.

Clark Public Utilities has stated that meter replacement causes a momentary outage, and the utility provides advance notice to affected customers, including postcards ahead of planned infrastructure work in their area.

No. Numerous Washington utilities, including Tacoma Power, Seattle City Light, Chelan PUD, and Puget Sound Energy, have already deployed or are deploying comparable AMI systems, and roughly 72 percent of U.S. electric meters already used AMI technology as of 2022, meaning Clark Public Utilities is adopting an established, well-proven technology category.

Some Washington utilities offer opt-out programs with alternative, non-wireless metering technology for customers with specific concerns, though availability and specific policy vary by utility, so customers should check directly with their provider.

Clark Public Utilities is targeting full system-wide deployment of its AMI system for both electric and water customers by the first quarter of 2029, with preliminary infrastructure work beginning in the second half of 2026.

Related articles

Top