Manufacturing IoT
Washington Aerospace Manufacturing Moves Toward More Connected Production
Published by IOT Washington Research & Editorial Team

- What Connected Production Actually Means
- Where the Gains Show Up First
- The Supplier Tiers Matter
- A Phased Approach for a Mid-Size Shop
- Connected Production and Aircraft Certification
- Challenges to Expect
- Examples of Connected Production in Practice
- Data Ownership and Customer Expectations
- Workforce and Training
- Metrics Worth Tracking
- Funding and Support
- Where It Is Headed
Washington's aerospace industry is a network, not a single factory. Boeing assembles airplanes in Everett and Renton, but thousands of parts arrive from suppliers across Puget Sound and Eastern Washington, and each one has to arrive on time with its paperwork complete. Connected production is the effort to make that whole chain visible, with machines, tools and inspection stations reporting what they are doing as it happens.
The shift is gradual and uneven. Some plants are heavily instrumented while others still run on clipboards. This article explains what connected production means in practice, where the benefits show up first, and how a smaller supplier can begin without a large budget.
What Connected Production Actually Means
It means four things working together. Machines report status and output. Tools and gauges record what they measured. Parts and tooling carry identifiers that can be scanned. And a software layer joins those records to a specific part, lot or aircraft. None of that requires exotic technology. Most of it is sensors, barcodes, industrial networking and a database.
The aim is to replace two slow habits: finding out about a problem at final inspection, and answering a customer audit by hunting for paper. Connected plants find out sooner and answer faster.
Where the Gains Show Up First
| Area | Typical connected tool | Benefit |
|---|---|---|
| Machine uptime | Spindle, vibration and power monitoring on CNC machines | Fewer surprise stoppages and better scheduling |
| Quality records | Gauges and coordinate measuring machines that send results automatically | Less manual entry and fewer transcription errors |
| Tooling and fixtures | RFID or barcode tracking | Less time spent searching, fewer lost tools |
| Traceability | Serial-level records linked to parts and lots | Faster audit responses and cleaner containment if a defect appears |
| Safety | Wearables and zone sensors | Earlier warning on hazards |
Machine uptime is usually the easiest place to begin because the savings are visible in a few weeks. Our look at downtime reduction in Tacoma manufacturing shows how basic monitoring pays back.
The Supplier Tiers Matter
Tier one suppliers feel the pressure first because the prime contractor asks for detailed records. Tier two and three shops often make a single process, such as machining, heat treating or finishing, and they receive requirements passed down the chain. A small shop in Kent or Spokane may be asked for more data than it has ever produced. See the Kent industrial IoT page and the Spokane manufacturing IoT page for local context.
The practical answer is to treat data collection as part of normal production rather than a separate paperwork task. When the gauge sends the measurement directly, the operator does not have to retype it.
A Phased Approach for a Mid-Size Shop
- Pick one bottleneck. Choose a machine or cell that limits throughput, and instrument that first.
- Measure a baseline. Record uptime, scrap and setup time for a few weeks before changing anything.
- Connect quality data. Link one or two gauges so measurements flow to a single record per part.
- Add identifiers. Use barcodes or RFID on travelers, tooling and bins so records stay attached to parts.
- Review weekly. Hold a short meeting about what the data shows, and assign an action for each finding.
- Expand only after a win. Move to the next cell when the first one has shown measurable results.
Small and mid-sized plants have followed this pattern elsewhere in the state. The piece on smart factories for small and mid-sized Spokane manufacturers describes it in more detail, and state smart manufacturing programs lists support that may reduce the cost.
Connected Production and Aircraft Certification
Aerospace is regulated closely, so traceability is not optional. After the 2024 door plug incident, expectations around documented work have only risen. A connected plant can show who did what, with which tool, and what the result was. That does not replace human inspection. It makes inspection records harder to lose and easier to search.
Challenges to Expect
Older machines often lack digital outputs, so retrofit sensors or edge gateways are needed. Networks on the shop floor must be separated from office systems, since a connected machine is also a possible entry point for attackers. Skilled labor is another limit. Someone has to look after the system, and many shops lack a dedicated controls or data person. Partnering with a regional integrator or a technical college can help fill that gap.
Cost is manageable when work is staged. A starter system covering a few machines and gauges is a fraction of the price of a plant-wide platform, and it produces the evidence needed to justify the next step.
Examples of Connected Production in Practice
Picture a machine shop in Kent that makes brackets and fittings. Before connecting anything, the owner believes the main constraint is a particular five-axis machine. After installing power and vibration monitors, the data shows the machine is actually running only about half the scheduled hours because of waiting for material, inspection and setup. The fix turns out to be scheduling and material staging, not a new machine. That kind of discovery is common, and it is why many shops start with simple monitoring before spending on equipment.
A second example is a finishing shop that handles anodizing for aircraft parts. Bath temperature, chemical concentration and dwell time all matter, and each has a tolerance. Automatic logging of those values for every lot gives the shop proof that the process stayed in range, which is exactly what its customer's auditors ask for. It also helps staff catch a drifting bath before a batch is ruined.
Data Ownership and Customer Expectations
As suppliers collect more data, questions about who owns it and who can see it come up. Contracts may require sharing certain records with the prime contractor, while process details remain proprietary. Shops should agree early on what is shared, in what format and for how long it is retained. A clear data policy also helps when a customer audit arrives, because staff know where records are and who may release them.
Workforce and Training
Connected production changes jobs more than it eliminates them. Machine operators spend less time on paperwork and more on interpreting results. Maintenance staff need basic networking and sensor skills. Quality staff learn to work with statistical views rather than individual measurements. Short training programs, often delivered by integrators or colleges, are usually enough to get a team started.
Metrics Worth Tracking
Connected production should be judged by results. Good measures for a Washington aerospace supplier include overall equipment effectiveness, which combines availability, speed and quality; first-pass yield; time spent on setups; and the time needed to produce a full traceability record for a lot. If a customer asks for records and the answer takes days, that is a sign data is not yet connected.
It also helps to track soft measures. Operators who spend less time on paperwork and more on production usually report higher satisfaction, and lower turnover saves training cost. Though harder to quantify, it is a real benefit worth noting in reviews.
Funding and Support
State and regional programs sometimes help manufacturers pay for assessments, training or equipment. Federal manufacturing extension partnerships also offer practical advice to small firms. Before spending, shops should ask what support is available and whether a pilot can be partly funded. Even when no grant applies, a staged plan keeps risk low and lets the owner stop if results disappoint.
Where It Is Headed
Expect more plants to link their machine data to the prime contractor's quality systems, more use of digital twins to plan new work cells, and growing use of analytics to forecast supplier delivery risk. The state's aerospace base is large enough that these changes will spread. Suppliers that start now will be easier to work with and better placed when production rates climb. For the wider picture, read industrial IoT across Washington.
