Agriculture IoT
Washington Agriculture Turns to IoT for Smarter Irrigation
Published by IOT Washington Research & Editorial Team

- The Public Backbone: AgWeatherNet
- What Soil Moisture Sensors Add
- Extension Projects Show What Works
- How This Differs From Other Water-Saving Stories
- Getting Started
- Barriers Growers Report
- Crop by Crop: Where Sensors Help Most
- Water Rights, Reporting and Documentation
- Energy and Labor Savings
- A Season With Sensors
- Cost and Return in Plain Terms
- What Comes Next
In April 2026 Washington declared a drought emergency covering all of the state's watersheds. For growers, that turned a long-running interest in irrigation technology into a practical necessity. Water that is applied by habit rather than measurement is hard to defend in a year when supply is short.
The response is visible across the state. Public weather networks are expanding, extension programs are placing soil sensors on working farms, and growers are asking what a sensor can tell them that a shovel cannot. This article looks at what is happening and how a grower can use it.
The Public Backbone: AgWeatherNet
Washington State University's AgWeatherNet is one of the most useful pieces of farm technology in the state, and it is free to use. Reports differ on the exact station count, with figures from more than 360 to more than 550 depending on source and date, so it is safest to say it is a large network that keeps growing. Stations refresh about every five minutes, and a new bilingual app puts the data on a phone. The AWN Smart Farms program connects the network to irrigation, frost and heat management decisions.
A $1.5 million investment from the Washington State Department of Agriculture is adding four-depth soil probes at more than 220 stations. That matters because weather alone does not say how much water is in the root zone. Adding soil moisture to the same stations gives growers nearby reference data without buying everything themselves.
What Soil Moisture Sensors Add
| Measurement | What it tells you | Why it helps |
|---|---|---|
| Soil moisture at several depths | Where water is in the root zone | Avoids watering past the roots or stopping too soon |
| Weather and evapotranspiration | How fast the crop is using water | Sets how much to apply |
| Flow meters | How much water was actually delivered | Catches leaks and stuck valves |
| Plant stress sensors | How the plant is responding | Fine-tunes timing in high-value crops |
Sensors are commonly placed at 6, 12, 18 and 24 inches. Shallow readings show what a recent irrigation did. Deeper readings show whether water is reaching, or passing, the roots.
Extension Projects Show What Works
WSU Extension has placed Watermark soil sensors on six farms on the Olympic Peninsula, giving small producers a look at their own soil data. A separate USDA NRCS project of about $1.2 million supports 66 sensors. The WSU Irrigation Scheduler, a free tool, combines weather and crop information to suggest timing. Larger research efforts, including the $20 million AgAID institute, study how AI can support decision making on farms.
These projects matter because they build local evidence. A sensor reading means more once a grower has seen how it compares to the crop's actual response.
How This Differs From Other Water-Saving Stories
Earlier coverage looked at soil sensors during a drought year and at smart irrigation in the Columbia Basin. The new development is the public infrastructure: stations, apps and subsidized sensors that lower the barrier to entry. Growers with orchards may also want to read about orchard monitoring for tree fruit, and vineyard owners can see frost and irrigation in Vancouver vineyards.
Getting Started
- Use the free tools first. Check the nearest AgWeatherNet station and try the WSU Irrigation Scheduler.
- Choose representative spots. Place sensors where soil and crop are typical, not in the best or worst corner.
- Use multiple depths. One probe depth gives an incomplete picture.
- Set simple rules. For example, irrigate when the 12 inch reading falls below a chosen level.
- Check against reality. Dig a hole occasionally and compare the sensor with what you see.
- Ask about cost share. Conservation districts and NRCS programs sometimes support sensor purchases.
Barriers Growers Report
Cost remains the first concern, especially for small farms. Interpreting the data is the second. A chart is not a decision, and many growers want advice on thresholds for their soil. Connectivity in rural areas is the third, which is why low-power networks and stations with local data logging are popular. Finally, older irrigation systems may need valve upgrades before they can respond to sensor data automatically.
Crop by Crop: Where Sensors Help Most
Tree fruit is a leading case. Apples, pears and cherries are high-value, and both too much and too little water affect size, firmness and disease. Orchards often vary within a block because of soil changes and slope, so a few well placed sensors tell more than a calendar schedule. Vineyards use deliberate water stress to shape fruit quality, which makes precise measurement valuable rather than just thrifty.
Row crops such as potatoes, onions and hay are irrigated heavily across the Columbia Basin, often with center pivots. Soil sensors on a pivot can guide the speed and run time, and can show whether water is reaching the lower root zone. Wheat farmers in drier regions use moisture data for planting depth and fertilizer timing more than for irrigation.
Water Rights, Reporting and Documentation
Growers operate under water rights that limit how much they can divert. Measured data helps show that use stays within limits, and in a curtailment year it supports a case for how water was used. Flow meters on irrigation lines produce records that can be shared with regulators or irrigation districts when needed. Documenting efficiency can also support grant applications and cost-share programs.
Energy and Labor Savings
Pumping water takes energy, so applying less water often lowers power costs, and shifting pumping to cheaper hours adds to the savings. Labor is the other gain. Instead of driving to check each block, a manager can look at a phone and send a crew only where a reading calls for attention. In a tight farm labor market, that time matters.
A Season With Sensors
Consider a grower with a forty acre apple block. In spring, soil moisture readings show the profile is full from winter and early rains, so the first irrigation waits another week. In summer, readings at 18 and 24 inches begin to drop quickly during a heat wave, so the manager lengthens sets and watches the deeper sensor to confirm water is reaching the roots. In late summer, the data shows the lower slope staying wet while the upper slope dries, which leads to separate irrigation zones for next year.
None of this requires advanced analytics. It requires placing a few sensors well, looking at them regularly, and writing down what was changed and why. Over several seasons the grower builds a record that is more useful than any single year of data.
Cost and Return in Plain Terms
A modest setup, with a few probes at several depths and access to free weather data, can cost less than one irrigation pump repair. If it cuts water use by even a tenth, the savings on power and water begin to cover the cost within a season or two, and avoiding over-irrigation can reduce nutrient loss and disease. In drought years, the larger benefit is resilience: a grower who knows exactly how much water the crop needs can make better choices when supply is limited.
What Comes Next
Expect more soil data on public stations, more apps in multiple languages, and tighter links between sensors, valves and scheduling tools. Cold storage and packing operations also benefit when growers deliver a consistent crop, which ties into cold chain work for apple exporters. For statewide context see precision agriculture in Washington and the agriculture IoT category. As drought becomes more common, measured irrigation is likely to shift from an option to a normal part of farming in the state.
