Agriculture IoT
Washington Farmers Use Sensors to Respond to Water and Weather Risk
Published by IOT Washington Research & Editorial Team

- A Map of Farm Risks
- Drought: Know What You Have
- Frost: A Few Degrees, A Few Hours
- Heat: Protecting Crops and People
- Smoke and Fire
- Floods and Wet Years
- Putting the Data to Work
- Cold Chain and Downstream Effects
- Barriers and Support
- Case Study Patterns From Washington Farms
- What a Good Alert Looks Like
- Records, Insurance and Lenders
- Looking Ahead
Weather has always been a farming risk, but in Washington the margin for error is shrinking. The state declared a drought emergency covering all watersheds in April 2026, and growers also deal with spring frosts, summer heat, smoke, hail and occasional flooding. The difference now is that more of those risks can be measured and acted on early, by sensors that report conditions across a farm in near real time.
This article takes a risk-by-risk view of how Washington farmers use sensors, and complements earlier pieces on irrigation by covering the broader set of weather hazards.
A Map of Farm Risks
| Risk | Typical timing | Sensor response |
|---|---|---|
| Drought and water shortage | Spring through late summer | Soil moisture, flow meters, public weather data |
| Spring frost | Bloom and early growth | Low-level temperature nodes with alerts |
| Heat stress | Mid summer | Canopy temperature, humidity, soil readings |
| Wildfire smoke | Late summer | Air quality sensors and regional fire data |
| Flooding and runoff | Winter and spring | Stream and field level sensors, rain gauges |
| Hail and wind | Spring and summer | Weather stations with storm alerts |
Drought: Know What You Have
Water is the largest issue. Soil probes at several depths show how much moisture the crop can reach, while flow meters record what was applied. Free public data from Washington State University's weather network adds regional temperature, humidity and water use estimates. Together they help a grower avoid both over and under watering. For the full irrigation picture, read Washington agriculture turns to IoT for smarter irrigation and smart irrigation in the Columbia Basin.
Frost: A Few Degrees, A Few Hours
Frost damage depends on how cold it gets and for how long, and conditions differ across a field. Small temperature nodes placed at crop height in low and high spots give a local reading that a regional forecast cannot. When temperatures near a critical level, the system sends an alert so crews can start protection. Orchards and vineyards use this the most, and our look at orchard monitoring for Washington tree fruit explains how.
Heat: Protecting Crops and People
Heat reduces fruit quality, causes sunburn and raises irrigation demand. Sensors help schedule irrigation earlier in the day and trigger cooling steps where available. They also help managers protect workers, since temperature and humidity data can support heat safety plans and break schedules. Washington has workplace rules for outdoor heat, and recorded conditions help show that they were followed.
Smoke and Fire
Fire season now brings regular smoke events. Air quality sensors help farms decide when to adjust work schedules, and they document conditions for insurance or buyer questions. For early detection and public safety, the piece on wildfire early warning in Eastern Washington covers the wider network.
Floods and Wet Years
Although drought dominates headlines, wet winters and spring storms still cause damage. Rain gauges and level sensors on ditches or streams give warning of rising water. Soil moisture sensors show saturation, which affects when machines can enter fields and when planting is safe. Having this data helps avoid soil compaction as well as crop loss.
Putting the Data to Work
- List your top three risks. Match each to a measurement.
- Start with a small set of sensors. Place them where conditions are most variable.
- Use shared alerts. Send warnings to the people who can respond, by phone or text.
- Write simple response plans. Decide in advance what happens at each threshold.
- Review after each event. Compare what the data said to what happened, and adjust thresholds.
Precision methods that connect these pieces are covered in precision agriculture in Washington.
Cold Chain and Downstream Effects
Weather risk does not stop at the field gate. Crops harvested in heat need quick cooling, and storage and shipping must hold the right temperature. Growers who track conditions from field to storage can show buyers a clear record. See cold chain for apple exporters in Tacoma for the export side.
Barriers and Support
Cost, rural connectivity and time are the usual obstacles. Cost-share programs, extension projects and conservation districts sometimes help. Choosing a system that works without constant internet, and that sends only useful alerts, reduces frustration. Training matters too, because the best sensor network still depends on people responding.
Case Study Patterns From Washington Farms
A tree fruit grower in the Wenatchee area may combine frost nodes, soil probes and a rain gauge, with alerts sent to the foreman and the owner. A potato grower in the Columbia Basin may rely on soil sensors on each center pivot plus a weather station that feeds the irrigation schedule. A dairy or hay farmer in western Washington may focus on rain, saturation and stream level, since wet conditions affect harvest windows and manure application. The sensors differ, but the logic is the same: measure the local condition that drives the decision, set a threshold and respond.
What a Good Alert Looks Like
Alerts should be rare, specific and actionable. A message that says low block temperature reached 30 degrees, with a forecast low of 28 by 4 a.m., is more useful than a generic warning. Too many alerts teach people to ignore them. Start with a few thresholds, review how often they fire, and tune them each season. Include a named person who is responsible for each type of alert, along with a backup.
Records, Insurance and Lenders
Data collected during a weather event can support insurance claims and help explain losses to lenders. It also gives the farm a track record, which may matter in future financing. Keep records in a format that can be exported, and make sure the vendor contract allows access to historical data if you change systems.
Looking Ahead
The trend is toward more connected stations, better local forecasts and automatic responses such as valves, fans or pumps triggered by thresholds. Insurance companies and lenders are also beginning to ask about monitoring. Farms that collect data now will have a useful record when those questions arrive. Local listings are available on the Spokane agriculture IoT page.
